Master Key Plus

DOS Memory Limitations Concerns

Level	Totals Per Level
GGGGMK	1	The most accurate information
GGGMK	6	regarding system memory can be
GGMK	36	obtained by pressing O from
GMK	216	the main menu, and selecting
MK	3125	the Memory Information.
CK	80000+

*** NOTE: #CK's will default value is 60000. This value can be change by using a startup parameter when executing Master Key Plus.
Example:
By using the following commands to execute Master Key Plus
C:> Mkplus -B02

The above command will limit the change keys to 8000, and may be necessary on some computers that have smaller amounts of memory, or slow hard drives. Master Key Plus will execute with the default value of -B15, but if the allocation delay is too long then this parameter is available to make the above changes. (i.e. -b20 will result in 100000 changes.)

---

C:> Mkplus -E
This command tells Master Key Plus to NOT use extended or expanded memory. The default is for Master Key Plus to use any memory available, including expanded and/or extend memory. If this option is enabled the performance of Master Key Plus may decrease, or slow down.
**** The -E command must follow the executable file Mkplus.EXE, and not the batch file Mkplus.BAT. You may however change the default setting in the actual batch file.